Important Considerations For Selecting A Safety Padlock
Important considerations for selecting a Safety Padlock
The Safety Padlock has a wide selection of colors, sizes, shapes and door layouts. In addition to selecting a Safety Padlock that meets NFPA, OSHA requirements and has FM certification, other factors must be considered.
It is important to identify all the chemicals to be stored and to catalog them. Carefully review the Material Safety Data Sheet (MSDS) to determine the relevant characteristics and recommended storage practices. In order to avoid toxic explosions and fire, isolating incompatible chemicals is critical. Relevant regulations and the Right to Information Act (or the Hazard Communication Standards) provide for the labeling and training of chemicals. In order to facilitate the use of access point MSDS table, but also specifically provides a "document storage box", directly attached to the security padlock.
One of the factors that choose a Safety Padlock is the relationship between the chemical and the Safety Padlock itself. For example, for non-flammable acidic substances and corrosive liquids, the construction material should be polyethylene or wood laminate. However, for flammable but less corrosive liquids, it is recommended to use chemically resistant steel cabinets with polyethylene linings. Steel Safety Padlocks are suitable for flammable liquids, and choosing the right color is good for managing and isolating a wide variety of liquids. Although the specification does not enforce a specific color, but for the specified liquid, the industry has the usual color to follow.
Regulations and safety
As stated earlier, the construction standards must comply with the requirements of NFPA and OSHA. In some areas where compliance with the International Fire Code (IFC) or NFPA1 "uniform fire protection regulations" is required, further requirements for flammable liquid Safety Padlocks should be properly installed and automatically closed.
The Safety Padlock has a single door and two doors, two closed types: manual or auto off. Economical manual closing doors can be fully open to 180 degrees and require the user to close the door personally. Automatic closing, self-positioning of the door is used in a control device is released when the automatic closure of the body. During use, the fusible wire pulls the door, but if the door is always open, the fire will melt at 165 ° F (74 ° C) and automatically close the door. Although some states in the United States that use specific fire codes require automatic door closures, it is recommended that you always contact your local authorities for specific requirements. The automatic closing door eliminates the potential "considered factor" of forgetting to close the door, making sure the door is closed. So for a good overall security plan, automatic closing the door is often preferred. There is also an advantage: the automatic closing mechanism is hidden in the top wall of the cabinet, maximizing the available storage space.
Both the manual and the automatic shut-off doors, the self-locking doors and handles are critical, because it is not necessary for the user to manually rotate the handle to ensure that the three-point door lock is properly engaged. Stainless steel bullet self-locking system provides a reliable shut-off capability and the best service life, while the heat resistance has improved.
Safety Padlock is a kind of security for the storage of various types of productive or living substances or information security products, the role of security padlock is stored. Can be divided into chemical Safety Padlock, file security padlock, individual protective equipment Safety Padlock, gas pad Safety Padlock, ventilation Safety Padlock and so on.
The general situation is based on the storage of substances to classify: FM certified chemical Safety Padlock, file security padlock, individual protective equipment Safety Padlock, cylinder Safety Padlock, ventilation Safety Padlock and so on.
First, the chemical Safety Padlock: used to store all kinds of chemical substances in the cabinet, but not the chemical substances directly stored in the cabinet inside, but the storage of chemical substances contained in the safety tank or container. The role of the chemical Safety Padlock: in the event of a dangerous situation, so that the scene of the workers have time to leave the scene, to avoid personal injury. Its role is to protect the safety of personnel.