Responsibility for accident
The production workshop was changed to a big shift, and all the mechanical and electrical personnel in the factory were repairing. Huang ru gathered at the mixer no. 1 in workshop d for repairing the mixer bottom enclosure of the mixer. "A switch, check the electricity, tagout, lockout, set up the guardian" (there are two common maintenance), but he didn't do it "off valve, dial the steam pipe, take the bolt", huang during maintenance mixer floor with a hammer percussion, resulting in of the vibration of steam pipe switch, automatic firing, and closing the bottom of the mixer door, caught in the bottom part of huang chest, through to central songjiang hospital rescue invalid death.
This accident, to the bereaved family caused great grief, to the company colleagues brought great pain and psychological shadow. At the same time, also caused extremely bad influence to the company's image.
As the workshop management personnel, they should carefully implement the company's safety rules and regulations and the work instructions of the company's leadership, and do a thorough job of safety supervision, and conduct a detailed, in-depth and comprehensive investigation of the unsafe state in the shift maintenance work. In the process of maintenance, enhance the identification and prediction ability of hazard sources. As the management personnel of the company, they should carry out effective supervision in the process of shift maintenance. Whether the employees operate according to the regulations and whether the management personnel supervise in place is an important reason for the accident.