Temporary power and ventilation cannot perform Lockout tagout process
Sometimes the equipment maintenance needs power or compressed air, so the Lockout tagout process cannot be implemented. This is not only a misunderstanding, but also a common problem encountered in the early implementation of Lockout tagout, mostly due to resistance feedback from maintenance personnel. During the maintenance of the equipment, there is a period of power connection, such as debugging and positioning, when temporary unlock and delisting is required. The steps for temporarily unlocking and delisting are:. Clean up maintenance tools and materials; @ fulfill the steps of unlocking and delisting; . Connect to the energy, carry out necessary debugging, positioning and other work; Perform the Lockout tagout step again. It should be clarified to the maintenance personnel that such "Lockout tagout" procedures are indispensable to the safety of the maintenance personnel and cannot be refused to perform the Lockout tagout process.