Lockey 25mm Plastic Shackle Safety Padlock

Lockey 25mm Plastic Shackle Safety Padlock
Product Details


Part No.: CP25P

Lockey 25mm Plastic Shackle Safety Padlock

  1. Reinforced nylon body, withstand temperature from -20℃ to +80℃. The steel shackle is chrome plated; the non-conductive shackle is made from nylon, withstand temperature from -20℃ to +120℃, ensuring the strength and deformation fracture not easily.

  2. Key Retaining Feature: When the shackle is open, the key can’t be removed.

  3. Laser printing and logo engraving available if required.

  4. All different colors available.

 

Part No.

Description

Shackle   Material

Specification

KA-CP38S

Keyed Alike

 

Steel

 

“KA”: Each padlock is keyed the same   in one group

“P”: Straight edge plastic lock body

“S”: Steel shackle

 

Other material can be customized:

“SS”: Stainless steel shackle

“BS”: Brass shackle

KD-CP38S

Keyed Differ

MK-CP38S

Keyed & Alike/Differ

GMK-CP38S

Grand Master Key

KA-CP38P

Keyed Alike

 

Nylon

KD-CP38P

Keyed Differ

MK-CP38P

Keyed & Alike/Differ

GMK-CP38P

Grand Master Key

CP25P455.jpg

Color Option:

P.jpg


Padlock Body Shape Option:


2018060210193963122991.jpg

A special design can be made to meet our customers’ needs, our base clamping valve lockout made by one of the best manufacturers and suppliers of lockout products in China - LOCKEY. You are welcomed to wholesale custome-made base clamping valve lockout made in China at low price with our factory, and we also offer you a free sample.



3.14 accident cases

Accident history

In 2012, the raw material section of tianshan cement plant was shut down for maintenance. One operator enters the tee under the long belt to clean the caked materials, and one person nearby to supervise. All of a sudden, the long belt opens and material falls from the top of the operator, hitting the operator. Beside the guardian immediately contact the central control personnel stop, the operator rescued. No casualties were reported.

The cause of the accident

1. When the machine is stopped for maintenance, the long belt is not cut off and not tagout.

2. When the central control staff starts up the machine, it fails to check the on-site situation with the on-site staff.

3. The guardian fails to fulfill the responsibility of safety guardianship. When the belt is opened, it is not found and stopped in time.

Enlightenment and corrective measures:

1. When all equipment is stopped for maintenance, it must be cut off and tagout.

2. When the machine is stopped for maintenance, central control shall communicate and coordinate with field personnel to open any equipment, and confirm that the equipment to be opened is unmanned.

3. Safety monitoring personnel should take the responsibility of monitoring and keep contact with central control personnel of maintenance personnel in time.


Feedback