Lockey 76mm Steel Shackle Safety Padlock

Lockey 76mm Steel Shackle Safety Padlock

Part No.: CP76S Lockey 76mm Steel Shackle Safety Padlock Reinforced nylon body, withstand temperature from -20℃ to +80℃. The steel shackle is chrome plated; the non-conductive shackle is made from nylon, withstand temperature from -20℃ to +120℃, ensuring the strength and deformation fracture not...


Part No.: CP76S

Lockey 76mm Steel Shackle Safety Padlock

  1. Reinforced PA66 body, which can stand temperature from -20℃ to +80℃. The steel shackle is chrome plated, it can ensure the strength and deformation fracture not easily.

  2. Key Retain Feature: When the shackle keep opening , the key cannot be moved.

  3. Lasered printing and logo engraving available if needed.

  4. All different colors selectable.


Part No.


Shackle   Material



Key Alike System




“KA”: Each padlock is the same  key in a group

“P”: Straight edge plastic lock body

“S”: Steel shackle


Other material can be custom made:

“SS”: Stainless steel shackle

“BS”: Brass shackle


Key Differ System


Key & Alike/Differ System


Grand Master Key System


Key Alike System




Key Differ System


Key & Alike/Differ System


Grand Master Key System



1. Keyed Differ System(KD): Each padlock is keyed differently, supplied with 1 keys per lock. 20000pcs individual padlocks available.

2. Keyed Alike System (KA): Each padlock is keyed the same. 1 key will open all padlocks in each group.

3. Differ & Master Key System (KDMK): Each padlock is keyed differently, supplied with 1keys per lock. A master key will override and open any of these padlocks.

4. Alike & Master Key System (KAMK): Each padlock is keyed the same in one group. A master key will override and open all groups of Alike keyed.

5. Grand Master Key System (GMK): Each padlock is keyed different in one group. A grand master key will override and open all different KDMK groups.



It is important that each employee at a site has a unique padlock key to help prevent duplicate keys from jeopardizing your lockout program. We promise to use different key and numbering for each order if required. Besides each key can be recorded in our programming system so that you can reorder the same key whenever necessary.

Color Option:


Padlock Body Shape Option:


Durability: highly secure padlock design prevents thieves from removing locks by digging, digging, cutting or smashing. Despite its considerable safety, the safety padlock is not specifically designed to withstand physical impact. While the firmness and durability of the padlock is important - the most important consideration in a secure locking system should be that the key system used provides a large number of key options without key confusion. A key mix-up is when someone else's key happens to open your lock. Aluminum safety padlock with highly accurate key holder.

Resistance: tested by ASTM F883. For security padlocks, the higher the level, the better. Level 6 is the highest level. A typical safety padlock should have a level 4 or higher performance on all physical impact tests.

Maintenance of safety locks

Safety lock maintenance tips 1

We often use the locks, so we should pay more attention to the clean at ordinary times, what I call the clean is not just scraped her locks out like new, which is also difficult to complete, but he is not the most important, we are the most important part of clean lock core, we want to ensure that lock won't go to anything, otherwise it will be difficult to open the lock, not only so, the effect was less than we lock itself, but also will increase a lot of trouble to us.

Safety lock maintenance tips two

Humans can't withstand the ravages of time, there is always a lot of the older shows what we age, such as wrinkles will be more and more obvious, and our locks can also be influenced by time, it won't appear wrinkles, but in the long run, will appear inside lock core oxide layer, therefore, we in order to delay the case, you must to lock into lubricating oil regularly, graphite powder or pencil powder and so on.

The person in charge of maintenance and the executor shall wear the labor protection articles and carry out the safety protection measures according to the site conditions.

1. Add support frame, pad iron or guardrail to parts of equipment that fall, move or rotate.

2. The equipment that causes electric shock accident due to incorrect operation can be connected with grounding wire.

3. For the equipment with high temperature and scald danger, the temperature shall be measured with the thermometer gun first, and then the operation shall be carried out when the temperature drops to the operating temperature that can be operated by wearing labor protection gloves.

4. Safety belt must be worn when working at height. Safety belts must be thoroughly checked before use to ensure no damage.

5. A thick strip must be used to separate the servicer from the moving strip when working in a passing environment.

6. Before the equipment maintenance of multi-point control, the control points must be dealt with one by one to prevent misoperation, and the prohibited operation board must be hung.

After the completion of the implementation of safety protection measures, safety supervisors must carry out safety inspection.

According to the maintenance card requirements for maintenance

The person in charge of maintenance shall arrange the maintenance work in strict accordance with the maintenance items in the maintenance card.

The maintainer shall carry out maintenance one by one according to the tasks assigned by the person in charge of maintenance to ensure the integrity and high quality of maintenance. In the maintenance process to always keep a clear mind, seriously treat every detail, ready to send electricity at any time.

Safety supervisor intermittently supervision, remind, once found a safety hazard, immediately make it stop maintenance, and carry out rectification, rectification can continue to work after qualified.

In case of cross-operation during maintenance, the person in charge of maintenance shall contact the person in charge of the other party for coordination, and explain the nature of the work and matters needing attention to the other party. Also for some possible emergencies, the arrangement of security measures to ensure the safety of both sides of the personal safety and equipment safety.

Self-check after overhaul

After the completion of maintenance, the person in charge of maintenance and the executor shall check the maintenance items one by one at the same time. Check the work to be careful, do not miss any screw, a thread. Not only to strictly control the quality of maintenance, from the appearance must also be beautiful. If any omission or irregularity is found, it shall be corrected in time to ensure that there will be no future trouble.

Clean up the site, remove the security measures, delist and send power

After passing the self-inspection, the maintainer shall check whether the tools are complete in case of short-circuit fault during power transmission. The sundries in the maintenance process should be all cleaned up and sorted according to the requirements. After the cleaning, the maintenance person in charge and the maintenance of the removal of security measures, ready to delist power. Before delisting, the person in charge of maintenance should make inspection around the equipment, observe whether others are working, and inform the other two persons in charge to prepare power transmission after confirming that no one is working. Before power transmission, the safety supervisor must check the removed safety protection measures and confirm that there is no safety

Hot Tags: lockey 76mm steel shackle safety padlock, manufacturers, suppliers, factory, customized, wholesale, price

Send Inquiry