Part No.: SBL04
Customized Valve Lockout
a) Made of transparent PC.
b) Prevent the valve handles from being turned when locked out.
c) Using the two semicircles to accommodate double lock valves.
d) Accommodate buttons up to 60mm tall.
Hole diameter: 7mm
Signs are divided into two types: general signs and local signs
LOTO master tag: a table representing a specific procedure for a locked device that identifies and describes the energy source, the locked/released point and method, the method of identification, and the associated risks associated with Lockout tagout. Also included is a schematic diagram of the equipment layout and the location of the energy isolation point and the corresponding risks.
LOTO local signs: approved local signs are posted directly on the equipment in a standard format near the entrance or security area. It defines approved methods of energy control and possible simple tasks to perform in a hazardous area.
Sign making process
1. Establish working groups:
Team members include at least maintenance personnel, production personnel, EHS personnel;
The maintenance staff usually serves as the team leader;
Project department designers may be required to participate if necessary
Consider electrical, hydro, wind, mechanical, or other professional needs
Make a copy of the LOTO card work order and machine plan or sketch
2 evaluation machine:
Conduct energy source identification and investigation of equipment
Evaluate the equipment to determine how many LOTO CARDS to use
Determine which energy sources need to be locked.